47 videos play all the wolf - mckee craft boat restoration captain house how to lubricate ariens snowblower augers and replace shear pins - duration: 13:11. alex s 117,808 views. Remove the rivets from the fiberglass floor of the boat. some lund boats are made of fiberglass, which is installed with pop rivets. press a punch up against the rivet and hammer down slightly on the punch to remove the nail from the center of the rivet.. I may remove the rub rail and unscrew the top of the boat and remove. that way i can cut the floor up in one piece. i really want to get a good look underneath to make sure everything is good. the transom feels solid, but i'm prepared to replace that as well if needed..
Peeled off all the old carpeting on my boat, and realized most of the wood in the back half of my boat is pretty rotted. my question is, is there a specific type of wood that i am supposed to use to make the floor of the boat.. You cannot repair the boat floor while rotten wood remains as it will only continue to rot. once you are confident that the rotten sections have been removed, you can start to repair the floor as needed. if you have the means and resources to remove a piece of the boat floor and replace it then that is the best thing you can do for the boat.. Step 1 - remove the damaged flooring. the most common material used for boat flooring is bc plywood, and it is also used for fiberglass boats in particular. start removing the old damaged material using an electric saw to cut it; if the stringers and bulkheads are rotten, get them replaced with fiberglass ones..
0 komentar:
Posting Komentar