With a female mold, you normally build three boats to get one--first a male plug on which the female mold is formed, then the mold, and finally the boat itself. capital costs, therefore, are quite high, which is why truly custom one-off fiberglass boats are quite rare.. This is a small effect,less than 1%, but it occurs twice, once when the mold is built and again when a boat is built in the mold. the degree of perfection of the plug will be directly transferred to the mold and thence to the finished boat.. In general round bilge hulls such as sail boats are best built over a batten mold & power boats are usually but not always built in a female mold. we have developed a 'cheap one-off mold' fiberglass boat building system that is ideal for building larger powerboats..
F actory made fiberglass boats utilize a female mold with laminates made of sprayed resin and chopped glass fibers or, in more expensive boats, hand laid fiberglass and polyester resin. these methods are only suitable for volume production due to the high cost of the mold.. J3 fiberglass inc has more than 32 years of experience in boat and yacht repair as well as boat building. trust us with you boat repairs! 6 years ago; j-3 fiberglass inc. was founded in 1995 and has been serving central florida and the gulf coast and its surrounding area for over 18 years. 6 years ago. Briefly this is a two stage mold construction video how to. the plug here is a subwoofer enclosure custom fit to the boot of my car and to any other car of the same model. this video specifically.
0 komentar:
Posting Komentar